<< Click to Display Table of Contents >> Navigation: Tabs Guide > View > Snap |
Figure 1. View Tab Submenu, Snap Options
•Snap to Grid snaps content to the placement grid, as detailed in (figure 2). The placement grid is detailed here.
•Snap to Guides snaps content to the guides detailed here.
•Snap to Objects snaps content to document objects.
Figure 2. Snap to Grid Enabled
Figure 3. Measurement Preferences
When the Use Snapping box is selected, it is possible to click Snapping in order to customize additional options:
Figure 4. Customize Snapping Dialog Box
•Clear the Show Snap location marks box to disable the snapping icons that indicate the current location during the editing of document content.
•Clear the Snap to Grid box to disable snapping to grids.
•Select the Snap to Grids Intersections only box to snap only to the locations at which grid lines intersect, as opposed to at any location on grid lines, which is the default setting. Use the Threshold dropdown menu to determine sensitivity as desired.
•Clear the Snap to Guides box to disable snapping to guides. When this box is selected, use the Threshold dropdown menu to determine sensitivity.
•Clear the Snap to Objects box to disable snapping to objects. Select the Snap to Annotations Only box as desired. Use the Threshold dropdown menu to determine sensitivity as desired.
•Use the Snap to options to determine the locations at which snapping is operational. The icons detailed in the box will appear when the pointer is hovered over these locations in the active document.
Click OK to save changes.